Sperreport
Products

Aluminium safety barrier gates — for offshore, industry and warehousing

A Sperreport is a spring-loaded safety barrier gate: a physical, reusable barrier that provides controlled, manageable access — unlike fixed railings (permanent) and barrier tape (no real access control). Four variants cover most needs in warehousing, industry and offshore. Aluminium doesn't rust in salt water and is lighter to handle than steel — a real advantage in marine and offshore environments.

SP–01Most popular

Sperreport Sideways

A spring-loaded swing gate: opens with one push, closes itself behind you. Mounts on a post or handrail — ideal for stairs and passageways.

Self-closing0.9–1.8 m
Request a quote
SP–02

Sperreport Vertical

The arm swings up and down where there's no room for a sideways opening — doorways, ramps, loading zones and tight passageways.

Space-savingUp/down
Request a quote
SP–03

Barrier Trolley

A mobile chain trolley: wheel it to where it's needed, pull out the chain and hook it on. No drilling — barriered off in seconds.

MobileNo installation
Request a quote
SP–04

Sign Holder

A robust frame for HSE and zone signs — integrated on the gate or freestanding. The sign sits where the decision is made, not ten metres away.

On gate / freestandingInterchangeable sign
Request a quote
Standard vs. custom-made

Standard in stock, or custom-made to size

All variants are available as standardised solutions in stock for fast delivery. Doesn't the standard size fit? We assess your needs and custom-make to size, fixing points and preferred colour.

What is the difference between a Sperreport and barrier tape?

Barrier tape isn't a real physical barrier — it's torn down to be "opened" and is rarely put back up. A Sperreport is a permanently mounted, spring-loaded gate that provides controlled opening and closes itself after every passage. It's standardised, recognisable and reusable for years, unlike tape that snaps and fades.

Which variant suits my needs?

The sideways model suits locations where you open/close frequently and have room for a sideways swing radius. The vertical model suits narrow passages, ramps and gateways where a sideways swing isn't possible. The barrier trolley suits temporary zones without permanent mounting. The sign holder is used together with the gates to place HSE signage exactly where the decision is made.

Are the Sperreport gates built for offshore use?

Yes. The products are built in powder-coated aluminium for tough, marine environments, and are used, among other things, for access control at red zones and other risk areas offshore. See our dedicated page on HSE and barrier management for how the products relate to Norwegian regulations.

Request a quote

Tell us what needs to be barriered off.

Send us a few lines about your needs — dimensions, environment and quantity — and we'll come back with a concrete proposal and quote. Standard models in stock mean fast delivery.

Or write directly to post@sperreport.no

Request a quote