Sperreport
Norwegian manufacturer · Randaberg

A safety barrier gate that holds. And closes itself.

Spring-loaded Sperreport gates in powder-coated aluminium for offshore, industrial and warehouse use. Standard models in stock for fast delivery — or custom-built to size, colour and requirements.

0.9 → 1.8 m
Telescopic arm
Self-closing
Spring return
In stock
Fast delivery
In production now
A Sperreport safety barrier gate seen from the side, with a red/white telescopic arm and integrated sign holder, mounted outdoors in front of Sverd i fjell in Hafrsfjord
Fig. 01 — Sperreport sidewaysHafrsfjord, Stavanger
Delivered to
ROTORTESSMENTONOVAHLSELLJL OFFSHORE
01 / The mechanism

Open with one push. The spring does the rest.

A barrier that stands open is no barrier. The Sperreport is spring-loaded: the arm swings aside as you pass — and closes itself behind you. Every time.

RESTRICTED ZONEACCESSFORBIDDEN0.9 M — EXTENDABLE TO 1.8 MSPRING RETURN — SELF-CLOSING
Diagram — top viewSperreport sideways
01

Self-closing spring mechanism

The coil spring always returns the arm to the closed position. No gates left open by mistake.

02

Telescopic arm — 0.9 to 1.8 metres

One gate covers everything from narrow stair access points to wide passageways.

03

The sign sits where the decision is made

Integrated sign holder in the centre of the arm — the message meets the eye at the entrance.

02 / Why Sperreport

Barrier tape doesn't do the job.

Most risk areas are ‘secured’ with tape, sticky tape or loose chain. It looks temporary — because it is.

Improvised barriers

  • Tape and sticky tape snap, fade and are left hanging
  • ‘Opened’ by being torn down — and rarely put back up
  • Loose hooks and chain are themselves a dropped-object risk
  • Looks untidy during audits and client visits

Result: a ‘barrier’ no one trusts.

Sperreport

  • A physical gate in powder-coated aluminium — built to withstand weather, salt and heavy use
  • Controlled opening — and closes itself after every pass
  • Standardised and recognisable — everyone understands the boundary
  • Reusable for years — low lifecycle cost

Result: a barrier that does the job. Every day.

03 / The product line

Four products. One system.

All built in powder-coated aluminium for tough environments — and all can be customised in size, colour and design.

SP–01★ Most popular

Sperreport Sideways

A spring-loaded swing gate: opens with one push, closes itself behind you. Mounts on a post or handrail — ideal for stairs and passageways.

Self-closing0.9–1.8 m
Request a quote
SP–02

Sperreport Vertical

The arm swings up and down where there's no room for a sideways opening — doorways, ramps, loading zones and tight passageways.

Space-savingUp/down
Request a quote
SP–03

Barrier Trolley

A mobile chain trolley: wheel it to where it's needed, pull out the chain and hook it on. No drilling — barriered off in seconds.

MobileNo installation
Request a quote
SP–04

Sign Holder

A robust frame for HSE and zone signs — integrated on the gate or freestanding. The sign sits where the decision is made, not ten metres away.

On gate / freestandingInterchangeable sign
Request a quote
05 / References
Per Simensen wearing a NORCE helmet and protective equipment at Ullrigg Test Centre, with Canrig equipment in the backgroundUllrigg Test Centre · Stavanger

«Very tidy solutions!»

Per SimensenSenior Project Manager, Ullrigg Test Centre (NORCE) — full-scale test drilling rig, Stavanger
06 / Quality

Welded, coated and delivered from Randaberg.

Every Sperreport is built from solid components in quality aluminium and powder-coated to withstand a marine environment for years. The vast majority of the gates we deliver are standard sizes — held ready in stock.

01

Standard straight from stock

Most needs are covered by the standard 0.9–1.8 m gate. It is already built and normally ships in under a week.

02

Custom sizes when needed

If the standard doesn't fit, we take the measurements and build to your dimensions, mounting points and colour.

03

Built in our own workshop

Welding, coating and assembly happen in Randaberg. As a small, specialised team we stay close to every single gate.

TIG welding of a Sperreport component in aluminium at the workshop
Request a quote

Tell us what needs to be barriered off.

Send us a few lines about your needs — dimensions, environment and quantity — and we'll come back with a concrete proposal and quote. Standard models in stock mean fast delivery.

Or write directly to post@sperreport.no

Request a quote